SPYDER Cela DT25
Our special DT25 SPYDER was created for interior and exterior work in large halls. It has a tracked travel and can be operated remotely! More...
Our special DT25 SPYDER was created for interior and exterior work in large halls. It has a tracked travel and can be operated remotely! More...
The DT25 SPYDER platform was specially created for indoor and outdoor work in large halls – airports, shopping malls, factories and other spacious buildings. Thanks to the compact design of the work platform, it is possible to easily adjust the passage width of only 80 cm, and the removable platform can also be used for work in hard-to-reach places.
The DT25 SPYDER work platform has a crawler travel and can also be controlled remotely. Its working height of the platform is 25 meters. At a load of 120 kilograms, the lateral reach is 11,5 meters, at full load it is limited to 9 meters for safety reasons. The machine will also allow a negative range of 5 meters below ground level.
The work platform can be easily replaced with a crane hook with a load capacity of 260 kilograms.
The work platform meets strict safety regulations and international standards. The platform’s protection system – hydraulic locks, pressure relief valves, double protection of electrical and hydraulic elements – ensures perfect safety of the worker in the platform and the personnel on the ground.
You most often use for:
| Working height | 25 m |
|---|---|
| Reach | 25 m |
| Horizontal outreach | up 11,5 m |
| Load capacity of the platform | 230 kg |
| Platform dimensions | 1,4 x 0,7 m |
| Platform rotation | No |
| Use | Exterior |
| Terrain | Reinforced flat surface |
| Construction | Articulated-telescopic |
| Dimensions at installation | 3,7 x 3,6 (2,5) m |
| Total machine weight | 2 950 kg |
| Transit width | 1,4 (1,15 ; 0,8) m |
| Transit height | 2,16 (1,98) m |
| Lenght | 4,92 m |
| Propulsion | Diesel/AC 230V |
| Chassis | crowler |
| Leveling supports | 4x |
| Manufacturer | Cela |
| Portable power generator (230 V) | 500 Kč / day |
|---|---|
| Crane mode adapter with hook (260 kg) | Na vyžádání |
| Crane lifting strap 1 t / 3 m (2 pcs) | 200 Kč / day |
| Crane lifting strap 1 t / 5 m (2 pcs) | 200 Kč / day |
| Load distribution plates (6 pcs set) | 500 Kč / day |
| Safety harness | 1099 Kč / pc. |
| Remote machine diagnostics | Price included |
|---|---|
| Operation of a self-propelled platform (Mon-Sun 0:00-24:00) | 490 Kč / hour |
| Introduction to machine operation | Price included |
| Modification against excessive dirtiness | 5000 Kč |
| Phone consultation in case of a problem | Price included |
| Mobile service unit operation in case of a breakdown | Price included |