The smallest representative of the category of column platforms with a working range of up to 6 meters. A useful helper and at a very reasonable price! More...
We will call you, explain everything and prepare an offer for you.
The smallest representative of the category of column platforms with a working range of up to 6 meters. A useful helper and at a very reasonable price!
The smallest representative from our range, but a very handy helper for a large amount of work, mainly indoors, but also on a flat and paved surface outdoors. With a low weight of 835 kilograms, it does not damage the substrate, has a very low external turning radius and precise proportional control. It passes through a 0,8 meter wide hole, can carry 230 kilograms and allows you to work at a height of up to 5,8 meters. It can move in a fully extended state and can handle a good deal of work on a single charge. The platform meets all strict international safety standards and regulations.
Most often used on:
| Working height | 5,8 m |
|---|---|
| Horizontal outreach | 0,4 m |
| Load capacity of the platform | 230 kg |
| Platform dimensions | 1,38 (1,77) x 0,77 m |
| Platform extension | 1 x 0,4 m |
| Use | Interior assembly , Film technique , Warehouse work |
| Terrain | Reinforced flat surface |
| Construction | Vertical mast |
| Dimensions at installation | 1,4 x 0,79 m |
| Total machine weight | 835 kg |
| Transit width | 0,79 m |
| Transit height | 1,75 m |
| Lenght | 1,4 m |
| Propulsion | Battery |
| Chassis | 4x2 |
| Manufacturer | GSR |
| Altitude reach | 5,8 m |
| Fork lifting pockets | Price included |
|---|---|
| Non-marking tires | Price included |
| Towing lugs | Price included |
| Crane lifting lugs | Price included |
| Harness | 1099 CZK for sale |
| Generator | 500 CZK / day |
| Compact distribution boards (4pcs set) | 500 CZK / day |
| Technical introduction | Price included |
|---|---|
| Dispatching | Price included |
| Mobile maintenence/repair unit in case of failure | Price included |
| Remote machine diagnostics | Price included |
| Technical consultant on the phone | Price included |
| Repair services 24/7 | 700 CZK / day |
| Repair services (0-24h) | 390 CZK/hr (MON-FRI) / 490 CZK/hr (SAT-SUN) |
| Preparation of the machine against soiling | 5000 CZK |
Fields marked with an asterisk* are required.
Aerial work platforms whenever and wherever you need them. 100% functional and regularly serviced.
Our trained customer service will help you with the selection and answer all your questions.
We have been supplying aerial work platforms throughout the Czech Republic for more than 20 years.
