Weight under 3,5 tons, working height up to 25 meters and load capacity of the platform is 230 kg. The DT25 car platform from the Italian manufacturer Cela has a wide range of uses. More...
We will call you, explain everything and prepare an offer for you.-
Weight under 3,5 tons, working height up to 25 meters and load capacity of the platform is 230 kg. The DT25 car platform from the Italian manufacturer Cela has a wide range of uses.
The articulated-telescopic construction allows a maximum lateral reach of 12 meters at a height of 14 meters. When using the lateral reach to only one side, it is possible to extend the supports only on the same side and thus reduce the space requirements for setting up the machine to almost 3,1 meters in width. The negative range of 5 meters allows work below ground level – for example on small bridge structures.
DT25 allows you to replace the work platform with a crane attachment.
Most often used on:
| Working height | 25 m |
|---|---|
| Horizontal outreach | 12 m |
| Load capacity of the platform | 230 kg |
| Platform dimensions | 1,4 x 0,7 m |
| Platform rotation | yes, 170° |
| Use | Repair and washing of facades , Roof repair and replacement , Repair and cleaning of gutters , Repair of high voltage lines , Installation of billboards and advertising banners , Windows cleaning , Bridge inspection , Repair and installation of public lighting |
| Terrain | Reinforced flat surface |
| Construction | Articulated-telescopic |
| Dimensions at installation | 6,62 x 4 m |
| Total machine weight | 3 345 kg |
| Transit width | 2,2 m |
| Transit height | 2,16 m |
| Lenght | 6,62 m |
| Propulsion | Diesel |
| Chassis | 4x2 |
| Leveling supports | 4x |
| Manufacturer | Cela |
| Chassis manufacturer | ISUZU |
| Beams for leveling the slope | Price included |
|---|---|
| Support plates | Price included |
| 230V socket in the work basket | Price included |
| Compact distribution boards (4pcs set) | 500 CZK / day |
| Harness | 1099 CZK for sale |
| Generator | 500 CZK / day |
| Service | Price included |
|---|---|
| Dispatching | Price included |
| Technical introduction | Price included |
| Mobile maintenence/repair unit in case of failure | Price included |
| Technical consultant on the phone | Price included |
| Preparation of the machine against soiling | 5000 CZK |
| Repair services 24/7 | 700 CZK / day |
Pole označená hvězdičkou* jsou povinná.
Aerial work platforms whenever and wherever you need them. 100% functional and regularly serviced.
Our trained customer service will help you with the selection and answer all your questions.
We have been supplying aerial work platforms throughout the Czech Republic for more than 20 years.
