Thanks to the 4×4 drive and the reduction gearbox, the IVECO Daily can handle difficult terrain with the Cela DT25 body. Minimum chassis dimensions and working height up to 25 meters. More...
We will call you, explain everything and prepare an offer for you.-
Thanks to the 4×4 drive and the reduction gearbox, the IVECO Daily can handle difficult terrain with the Cela DT25 body. Minimum chassis dimensions and working height up to 25 meters.
The work platform manufactured by Cela – DT25 – on the IVECO DAILY car chassis is suitable for various work at height, which requires mobility and frequent relocation of the platform.
The platform consists of a swivel on the chassis, a boom with two telescopic arms and a swivel work platform. The maximum reach of the platform is 25 meters in height and 12 meters to the side. The machine allows a negative range of 5 meters below the level of the chassis. The work platform can be replaced by a crane hook with a load capacity of 260 kilograms. The truck platform meets strict safety regulations and international standards. The stability of the platform is ensured by the subframe of the vehicle with four retractable supports that absorb the load of the platform.
Most often used on:
|Working height||25 m|
|Horizontal outreach||12 m|
|Load capacity of the platform||230 kg|
|Platform dimensions||1,4 x 0,7 m|
|Platform rotation||yes, 180°|
|Use||Maintenance and pruning of greenery , Repair of high voltage lines , Film technique , Repair and installation of public lighting|
|Dimensions at installation||7,48 x 2,3 m|
|Total machine weight||5 860 kg|
|Transit width||2,3 m|
|Transit height||2,55 m|
|Chassis||4x4 with differencial|
|230V socket in the work basket||Price included|
|Beams for leveling the slope||Price included|
|Support plates||Price included|
|Crane hook||on demand|
|Compact distribution boards (4pcs set)||500 CZK / day|
|Harness||1099 CZK for sale|
|Generator||500 CZK / day|
|Technical introduction||Price included|
|Mobile maintenence/repair unit in case of failure||Price included|
|Technical consultant on the phone||Price included|
|Preparation of the machine against soiling||5000 CZK|
|Repair services 24/7||700 CZK / day|
|Repair services (0-24h)||390 CZK/hr (MON-FRI) / 490 CZK/hr (SAT-SUN)|
Pole označená hvězdičkou* jsou povinná.
Aerial work platforms whenever and wherever you need them. 100% functional and regularly serviced.
Our trained customer service will help you with the selection and answer all your questions.
We have been supplying aerial work platforms throughout the Czech Republic for more than 20 years.