Our top machine with a Palfinger P480 superstructure allows you to work safely at a height of up to 48 meters. Extensive equipment and perfect performance, that's our "48"! More...
We will call you, explain everything and prepare an offer for you.
Truck mounted Palfinger P480 superstructure allows you to work safely at a height of up to 48 meters. Extensive equipment and perfect performance, that’s our “48”!
The platform has an electric current generator and a large work platform with a load capacity of up to 600 kg is equipped with sockets with a voltage of 230V and 380V. The machine can be equipped with plate material holders, which you can use, for example, when glazing buildings. The MAN TGM 18 chassis has all-wheel drive, so it can move in lighter terrain.
The construction of the car allows for quick adjustment and the platform is thus suitable for work where frequent relocation is required. The platform consists of a turntable on the chassis, a boom with an articulated telescope and a work platform on the so-called JIB arm, which moves at an angle of 240°. This makes it possible to get the work platform even in hard-to-reach places. The machine has a negative working range. The maximum range is 48 meters in height and 28 meters to the side. The truck platform meets strict safety regulations and international standards. The stability of the platform is ensured by the subframe of the vehicle with four retractable supports that absorb the load of the platform.
Most often used on:
|Working height||48 m|
|Horizontal outreach||up 28 m|
|Load capacity of the platform||600 kg|
|Platform dimensions||2,47 (3,88) x 1,05 m|
|Platform extension||1 x 1,41 m|
|Platform rotation||2 x 200°|
|Use||Installation of billboards and advertising banners , Maintenance and pruning of greenery , Christmas lighting installation , Repair of high voltage lines , Film technique , Repair and cleaning of gutters , Glazing , Bridge inspection|
|Terrain||Light and slightly sloping terrain|
|Construction||Articulated-telescopic with JIB|
|Dimensions at installation||9,92 x 6,7 m|
|Total machine weight||18 620 kg|
|Transit width||2,51 m|
|Transit height||3,96 m|
|Electricity generator (230V)||Price included|
|230V socket in the work basket||Price included|
|380V socket in the work basket||Price included|
|Support plates||Price included|
|Beams for leveling the slope||Price included|
|Compact distribution boards (4pcs set)||500 CZK / day|
|Board material holders||400 CZK / day|
|Harness||1099 CZK for sale|
|Generator||500 CZK / day|
|Technical introduction||Price included|
|Mobile maintenence/repair unit in case of failure||Price included|
|Technical consultant on the phone||Price included|
|Preparation of the machine against soiling||5000 CZK|
|Repair services 24/7||700 CZK / day|
|Repair services (0-24h)||390 CZK/hr (MON-FRI) / 490 CZK/hr (SAT-SUN)|
Fields marked with an asterisk* are required.
Aerial work platforms whenever and wherever you need them. 100% functional and regularly serviced.
Our trained customer service will help you with the selection and answer all your questions.
We have been supplying aerial work platforms throughout the Czech Republic for more than 20 years.