4 tons of cargo up to 13 meters. Easy operation, perfect terrain and rich accessories, this is the MT 1340 SLT.
We can equip the Manitou MT 1340 SLT with palletizing forks (also extended), a bucket, but also a work platform. The machine handles work in difficult terrain and handles a side slope of + – 10% – the tilt compensation system ensures safety when working. Thanks to the outer turning radius of less than 4 meters, it will be a good partner even in cramped spaces. Both turning axles allow the so-called crab operation. The maximum height is 13 meters and the reach of the arm is 9,34 meters.
Most often used on:
|Working height||13 m|
|Load capacity of the platform||4 000 kg|
|Use||Film technique , Assemly of industrial halls|
|Dimensions at installation||5,95 x 2,42 (3,82) m|
|Total machine weight||10 790 kg|
|Transit width||2,42 m|
|Transit height||2,59 m|
|Maximum load capacity||4 000 kg|
|Dimensions at installation (plugged)||3,82|
|Arm extension||9,34 m|
|Forklift lenght||1,2 m|
|Altitude reach||9,34 m|
|Pallet forks||Price included|
|Extended forks||on demand|
|Bucket 1,2 m³||on demand|
|Work platform||on demand|
|Harness||1099 CZK for sale|
|Generator||500 CZK / day|
|Technical introduction||Price included|
|Remote machine diagnostics||Price included|
|Mobile maintenence/repair unit in case of failure||Price included|
|Technical consultant on the phone||Price included|
|Preparation of the machine against soiling||5000 CZK|
|Manipulator operation||650 CZK / hr|
Fields marked with an asterisk* are required.
Aerial work platforms whenever and wherever you need them. 100% functional and regularly serviced.
Our trained customer service will help you with the selection and answer all your questions.
We have been supplying aerial work platforms throughout the Czech Republic for more than 20 years.