In the category On automotive chassis
With its mobility, speed and ease of use, the Nissan Cabstar E210PX work platform is suitable lifting equipment for a greater number of work operations at height in a short time.
The E210PX work platform mounted on the Nissan Cabstar chassis is suitable for installation, construction, reconstruction and other work at height, where mobility and frequently moving platforms are required.
The platform is built on the chassis from the turntable, boom with articulated telescope parts and hydraulically rotating work cage with all platform controls. The maximum platform range is 20.1 meters in height and 10.4 meters to the side.
The aerial platform meets strict safety regulations and international standards. The platform stability is ensured by the vehicle subframe with four outriggers that absorb the platform load. All platforms movements are secured with safety valves.
The Nissan Cabstar E210PX work platform was developed to show minimal cost of operation and maintenance.
The values in the column labeled associated with working diagram.
|Type||On automotive chassis|
|Field of application||Less challenging terrain|
|Working height - radius (m)||A||20.1|
|Maximum outreach (m)||B||10.4
|Cage load capacity (kg)||200|
|Total machine weight (kg)||3490|
|Drive||motor vozu / 230 V|
|Cage dimensions (m)||D x C||1,3 x 0,7
|Cage extension - prolongation (m)||E||-|
|Setting dimensions (m)||F x G||6,37 x 3,61
|Clearance width (m)||H (I)||2,22
|Clearance height (m)||J||2,6