Working height 45 meters, lateral reach up to 26 meters, platform load capacity 600 kilograms and even a negative reach 6 meters below the level of the chassis, this is our WT450! More...
We will call you, explain everything and prepare an offer for you.-
Working height 45 meters, lateral reach up to 26 meters, platform load capacity 600 kilograms and even a negative reach 6 meters below the level of the chassis, this is our WT450!
The construction of two telescopic arms – the first 4 section and the second 2 section, will allow a lateral reach of more than 20 meters at a height of up to 35 meters (with a platform load of 100 kg out of a total of 600 kg). The 4×4 drive and robust chassis with good approach angles allow the machine to move in the field and 4 supports ensure the necessary stability when working.
The Wumag superstructure is designed to allow a range of 6 meters below the level of the chassis. The WT450 can therefore be used to inspect smaller bridge structures. When using the lateral reach to only one side, it is possible to place the platform on 2 extended and 2 retracted supports and thus reduce the space required for the set machine by approximately 2 meters. The work platform can be equipped with board material holders with a load capacity of 350 kg. The truck platform meets strict safety regulations and international standards.
Most often used on:
| Working height | 45 m |
|---|---|
| Horizontal outreach | up 26 m |
| Load capacity of the platform | 600 kg |
| Platform dimensions | 2,47 (3,88) x 1,05 m |
| Platform extension | 1 x 1,41 m |
| Platform rotation | yes, 160° |
| Use | Repair of high voltage lines , Repair and washing of facades , Installation of billboards and advertising banners , Bridge inspection , Maintenance and pruning of greenery , Film technique , Glazing |
| Terrain | Light and slightly sloping terrain |
| Construction | Telescopic with JIB |
| Dimensions at installation | 9,96 x 6,52 m |
| Total machine weight | 18 000 kg |
| Transit width | 2,5 m |
| Transit height | 3,98 m |
| Lenght | 9,96 m |
| Propulsion | Diesel |
| Chassis | 4x4 |
| Leveling supports | 4x |
| Manufacturer | Wumag |
| Chassis manufacturer | MAN TGM |
| Beams for leveling the slope | Price included |
|---|---|
| Support plates | Price included |
| Harness | 1099 CZK for sale |
| Generator | 500 CZK / day |
| Compact distribution boards (4pcs set) | 500 CZK / day |
| Repair services 24/7 | 700 CZK / day |
|---|---|
| Preparation of the machine against soiling | 5000 CZK |
| Repair services (0-24h) | 390 CZK/hr (MON-FRI) / 490 CZK/hr (SAT-SUN) |
Pole označená hvězdičkou* jsou povinná.
Aerial work platforms whenever and wherever you need them. 100% functional and regularly serviced.
Our trained customer service will help you with the selection and answer all your questions.
We have been supplying aerial work platforms throughout the Czech Republic for more than 20 years.
